In this technological era, the wifi extender weak signal is a modern-day nightmare. Poor internet connectivity and slow loading can test the patience of users. But, in reality, it irritates the most. If you are also facing a slow internet speed issue after performing the Netgear EX6200 setup in your home and want to fix it, then you have come to the right place. Here, you are going to learn about the useful and effective solutions that will assist you to improve the internet network.
Before we jump into the solutions, we want to tell you some possible reasons that cause this issue.
Reasons: WiFi Extender Weak Signal
Here, we mentioned all the contributing factors that occur to this issue.
No internet from the ISP
Usage of Ethernet cable
Too many devices are accessing your extender network.
Now, you are properly familiarized with the reasons that cause the wifi weak signal issue. Let’s move to the troubleshooting tips.
Fix: WiFi Weak Signal
Contact Internet Service Provider
The foremost thing you need to do is contact your internet service provider. The reason is from the end of the ISP internet speed is not working properly. So, you should check the internet speed on your device. If you find that your internet is working at a snail's pace then you need to contact your ISP to fix the speed.
Cross-Check the Ethernet Cable
If you make the wired connection between the extender and router, then you have to take a small check on the Ethernet cable. There is a possibility that your Ethernet cable is damaged or maybe broken from somewhere which creates the network issue.
Thus, if you found a fault on the cable while checking then you need to get a new Ethernet cable from the market to change the cable.
Reduce the Number of Connected Devices
No doubt Netgear extender is the best networking device but it also creates issues when numerous devices are access to it at the same time. So, if you also access many devices with an extender network then you should try to decrease the number of devices so that you get the proper internet speed.
Update the Firmware
Some users are unaware of the firmware of the extender because they do not know the importance of it. If you are also among them, then you don’t need to worry from now onwards. Because we tell you about the firmware in brief so that you understand the concept of firmware in the extender.
Firmware is a kind of software that helps the extender to give the best outcomes. Firmware protects the device from unwanted files and small bugs so that the extender works in a good condition. In other words, firmware enhances the productivity of the device. Moreover, you can also do the Netgear extender firmware by performing the Mywifiext setup.
Restart the Device
If you are still standing in the same situation then you should try to reboot your device. There is a chance that your extender becomes the victim of technical glitches. To remove the temporary hiccups you need to restart your device. To do this, you need to cut off the power from the power source and remove the extender from the wall outlet. Thereafter, wait for some time and put it back into the power socket.
Now, you know all the possible solutions to improve the internet network of your extender. You just need to follow the above-mentioned hacks. We hope you will be able to get high-speed internet from the extender.