Netgear WiFi Extender Not Broadcasting SSID?

Netgear WiFi range extender not broadcasting Netgear_ext (SSID) has become one of the biggest issues for millions of users across the globe as they are unable to access the extended extender’s WiFi network.
There are a number of reasons why Netgear_ext (SSID) is not showing up in the list of network, let us make you familiar with them all and provide you solutions to get rid of the issue. Here we go!

Fixed: Netgear_ext (SSID) Not Showing Up

Here is the list of most common reasons causing the issue along with the solutions to get it fixed:
Reason 1

Placement of Netgear Extender is Not Right

It seems like that your Netgear WiFi range extender is installed in an area that is not catching proper WiFi signals from your existing router, resulting in the issue.
Solution
Thus, to get the issue fixed on the fly, ensure to place your Netgear WiFi extender at a location in your home where it has no difficulty fetching WiFi signals from your host router.
Reason 2

Obstructions Effecting Extender’s Signals

Solution
On the off chance, your Netgear WiFi range extender is located closer or near to baby monitors, Bluetooth speakers, Alexa devices, smart HDTV, gaming consoles, play stations, or other WiFi devices, then also you can experience “Netgear WiFi extender not broadcasting SSID” issue.
Hence, for getting the issue, ensure to keep your Netgear WiFi extender away from the above-mentioned instructions. Also, ensure to install your Netgear device at the higher and center-most area in your home. Just in case, you find your Netgear extender overheated, just restart it once by unplugging it from its respective power outlet, keep it unplugged for a couple of minutes, and thereafter, plug it back in again.
The power LED on the Netgear extender will start blinking, wait till it gets stable. Now, try to access Netgear_ext (SSID) on your computer, laptop, or smartphone, and see if this time you get success.
Reason 3

Netgear Extender and Router Connectivity Issue

Solution
You may get issues while accessing your Netgear extender’s SSID if there are connectivity issues between it (Netgear extender) and host router. Need not worry! For fixing this, ensure that your devices are firmly connected using a working Ethernet cable. Apart from this, make sure that the cable is properly inserted into the correct ports of your Netgear WiFi extender and router.
Reason 4

Improper Netgear Extender Setup

Solution
If you are still getting the same issue, ensure that you have properly configured your Netgear extender via http://192.168.1.250 (manual method). Keep in mind, if your device i.e. the Netgear extender is partially configured, then also its SSID may not appear on the list of networks. So, to stop your internet experience from getting hampered, you need to configure your Netgear extender in a proper way.

Still No Luck? Try This Out!

If you feel like your Netgear extender’s WiFi is still acting weird and giving you issues while accessing Netgear_ext (SSID), then without thinking much, refresh the network list of your device at once. Apart from this, ensure that you are attempting to access the correct SSID. Chances are you have changed the Netgear extender’s default SSID and trying to access some other. Moreover, ensure to use the correct password as well to have access over the Netgear extender’s SSID.
Pro Tip: Set a unique SSID (if yet not personalized) and a strong Netgear extender’s password. Doing so will keep WiFi leeches at bay and also prevent your bandwidth from getting eaten up or ruined by intruders.

The Ending Lines

That was all about our article on how to fix “Netgear WiFi extender not broadcasting SSID” issue. We really hope that the solutions we have listed over here helped you out in a bigger way.

Also Read About Mywifiext.net Is Not Working