Want to enjoy blazing-fast internet connection in every nook and cranny of your house? If you nod in yes, then do Netgear extender setup via mywifiext net (manual method) or using the WPS method.
Netgear WiFi range extender is one of the best WiFi devices to consider today if you want the internet range to follow your footsteps anywhere you go in your home. So, are you thinking about how to do Netgear extender setup? Think no more and walk through this piece of writing. Here, you will get to know step-by-step instructions about how to configure a Netgear WiFi range extender like a pro. Hence, stick to this 7-minute read and get ready to extend your existing internet range to far corners of your house.
Netgear Extender Setup via WPS Method
WiFi Protected setup aka WPS is the simplest way to configure a Netgear WiFi range extender. So, take the help of the steps outlined underneath and know how to setup Netgear extender:
Step 1: Plug in your Netgear WiFi extender into a power socket and press the power button.
Step 2: Place your host router and Netgear extender closer.
Step 3: Next, locate and press the Netgear extender’s WPS button and wait patiently for a couple of minutes.
Step 4: Apply the same steps highlighted above on your host router.
After some time, the WPS LED on your Netgear WiFi extender will become stable. If so, then it means that you have successfully configured your Netgear extender using the WPS method.
If you want to complete the Netgear WiFi extender setup process using the WPS method, then ensure that your router has the WPS button on it. By any chance, if you are unable to configure the Netgear extender via the WPS method because your router doesn’t have the same (WPS button), then use the manual method instead.
Netgear Extender Setup via Manual Method
Step 1: First things first, you need to put your Netgear extender and the host router on steady power. Moreover, ensure that you have plugged them into working sockets.
Step 2: Place your devices closer making use of an extension cord. Well, the use cord is suggested to those users who don’t have a wall socket for the Netgear extender on the other side of the router.
Step 3: Now, you need to make a wired connection between your router and the Netgear extender. Ensure to establish a finger-tight connection using a working wire (Ethernet cable). On the off chance, you don’t have a cable handy or the cable you have is damaged, then we suggest you connect them wirelessly. But, for this, you must not have slow or poor internet speed.
Step 4: Switch on a computer or laptop. Look, no matter what device you are going to use for Netgear WiFi extender setup, if its software is outdated, then you might experience configuration issues. So, update your computer or laptop’s software prior to using it.
Step 5: Thereafter, launch a web browser of your choice and enter mywifiext.net in the URL bar to access mywifiext.net setup page.
Keep in mind, you will get issues while accessing mywifiext.net setup page, if you have entered the Netgear extender’s default web address, mywifiext.net in the search bar or you have used the browser’s private window. Also, prevent yourself from committing typing errors by copying the web address from here and then pasting it in the URL bar.
Step 6: Press the Enter key and then you will be prompted to log in to your Netgear WiFi extender. Here, provide the default Netgear extender’s username and password in the required fields, and click Log In.
You Are All Done!
Go ahead and implement the on-screen instructions to complete the Netgear extender setup using the manual method. What happened? You haven’t even reached the mywifiext.net setup page yet? If so, then it seems like you have entered mywifiext.net in the search bar. Yes, that’s correct! 99 percent of users type the web address in the browser’s search bar instead of URL bar, get redirected to some other web page. So, to rectify your mistake, simply ignore the search bar.
Still Unable to Configure Netgear Extender?
If you are still unable to do Netgear extender setup manually, then ensure that:
Your ISP has solved the slow internet issue for you
The Netgear extender and router haven’t got disconnected during the process
You have access to the correct SSID
The Netgear extender login details used by you must be correct
And, the most important thing, you have followed the correct Netgear extender setup instructions in the exact given order provided on www.mywifiext.net setup page.
The Last Words
The instructions mentioned in this post will surely help you perform Netgear extender setup process using the manual or the WPS method with ease. If yes, then unplug your Netgear extender and plug it anywhere in your home. No matter what location you are about to choose for your Netgear extender, storeroom, lobby, living room, or your bedroom. The WiFi signals won’t drop and will surely blanket your home with high speed internet.