An Absolute Guide to Fix Amped Extender IP Not Working

Do you want to perform Amped wireless extender setup? Also, you want to update Amped wireless extender firmware? If yes, then you need to log in to your Amped wireless extender using But, almost 90 percent users come across “Amped extender IP not working” issue every time they try to login to Amped extender.

Are you amongst those users who are getting issues while logging into Amped extender using the IP? If your answer is a big yes, then this write-up is specially written for you. Here, we have provided some of the topmost fixes following which accessing the Amped wireless extender IP will be a piece of cake for you. Let’s get started!

Reasons: Amped Wireless Extender IP Not Working

Before we provide you fixes to troubleshoot the issue, let us make you familiar with the reason causing it. The reason being, if you have the reason in hand behind getting not working issue, it will become easy for you to resolve it:

  • You haven’t used the correct IP to log in to your Amped wireless extender

  • The Ethernet connection between your devices (extender and router) is not successfully made

  • Distance between your devices is too much

  • The web browser you are using is outdated

  • You have input the browser’s search bar

  • The private window has put into use for logging in to Amped wireless extender using the IP

  • Your internet connection is weak

  • You have not accessed the correct SSID (WiFi network name)

Now, take immediate of the topmost tested and proven hacks mentioned below in order to troubleshoot Amped wireless extender IP not working issue.

Fixed: Amped Extender IP Not Working

Fix 1: Reboot Your Amped Extender

We haven’t mentioned this in the list of our reasons, but technical glitches can also prevent you from logging in to your Amped wireless extender using In order to get rid of technical glitches, reboot your device (Amped) by following the instructions outlined underneath:

  • Turn off your Amped wireless and unplug it from its power outlet.

  • After unplugging the extender, wait for a couple of minutes.

  • Plug in back the Amped device again and turn it on.

Are you done with rebooting your Amped extender? If yes, then that’s great. Now, try to access the Amped wireless login page using and see if rebooting the device has bring you luck or not.

If you are struggling with the same issue, then you need to give a couple of fixes highlighted below a try.

Fix 2: Enter the Correct IP

Now, you need to check the IP address that you have input in the address bar field of your internet browser. Bear in mind, if there are typing errors in the IP, consider re-typing it. And, after entering the extender’s IP address again, do cross-check the entrée prior to pressing the Enter key.

Fix 3: Check the Connection

Now you need to pay attention towards the connection you have made between your Amped wireless range extender and router. In case you have used an Ethernet cable, then make sure that it is properly inserted into the correct ports of your devices and the connection is firmly made. After connecting your devices, try to pull out the cable. Did the cable come out easily? If not, then the Ethernet connection is successful.

And, if Ethernet connection doesn’t bear any fruit, then you are free to connect them wirelessly. But, ensure to maintain a safe distance between them.

Now, you need to access the Amped wireless setup page using to see if it (the IP) has started working for you.

If not then ensure that you have an active internet connection and you are accessing the correct WiFi network name (Amped extender’s SSID).

And, with the last hack, we are going to conclude our piece of writing on how to troubleshoot “Amped extender IP not working” issue. We hope that you rack up Amped wireless extender login success via IP.