Why My Linksys Velop Not Connecting to the Internet?

Are you getting issues while connecting your Linksys Velop to the internet? If you nod in yes, then there is nothing to worry about because you have reached the right post! Here, you will get the best troubleshooting hacks for fixing the issue in a flash. Thus, stick to reading!

Before we provide you the hacks for fixing the issue, ensure that you are not seeing a visible Linksys Velop red light. Because if you see red light on the device, it means that your Velop is not properly plugged in or getting a sufficient power. In such a case, you have to plugged in the device (the Velop) in a proper way to a working wall socket and ensure that it is receiving a steady power.
Once you are sure about providing a steady power to the Velop, you can proceed further and apply the fixes to troubleshoot “Linksys Velop not connecting to the internet” issue.

Fixed: Linksys Velop Not Connecting to Internet

Fix 1: Restart Your Velop

Technical glitches can cause the issue. Don’t worry! In order to do away with the technical glitches, restart or reboot your Linksys Velop.

Thus, follow the instructions highlighted below and learn how to initiate the rebooting process:

First things first, power off your Linksys Velop and unplug it from its wall outlet.
After unplugging the Velop, wait for a couple of minutes.
Plug your Linksys Velop back in and power it on.

After performing the rebooting process, try to connect your Linksys Velop to the internet. Is the issue still at your back? If yes, then give the other hack a try.

Fix 2: Check Your Internet Connection

If you are still experiencing “Linksys Velop not connecting to the internet” issue, it might be because of poor internet connectivity. Thus, we suggest you contact your internet service provider. Request him to help you in improving your existing internet speed by upgrading your data plan, clear all the pending bills, update the modem, etc.

After getting internet related issue fixed from the end of your ISP, try to connect your Velop with it and see if the issue is resolved by accessing the Linksys Velop login page.

Fix 3: Check the Connection Source

If you are experiencing the same issue even after following the above-mentioned two hacks, then it might be because you have used damage Ethernet connection for connecting your Linksys Velop and modem. There is nothing to worry about! Thus, consider connecting making an Ethernet connection between your Linksys Velop and modem with the help of working cable that must not have cuts or other damages.

Fix 4: Pull Your Devices Closer

So, you have placed your Linksys Velop and modem at a distance? If yes, then it’s high time to place them closer. The reason being, excessive distance between the devices may cause the internet-related issue. Therefore, ensure to place your Linksys Velop and modem closer.
And, if you have placed them in closer proximity, then ensure that they are not placed too closer. Why? Because if they are placed pretty closer, their WiFi signals may clash!

Thus, we hope that after implementing the above-mentioned hacks, you are able to troubleshoot “Linksys Velop not connecting to the internet” issue.

Bonus!
If you want to revamp your Linksys Velop’s performance, then you can do Linksys extender setup RE6300. Adding a Linksys WiFi range extender to the Linksys Velop ensures continuous internet connectivity in every nook and cranny of the house, without dropping WiFi signals.
Note: Linksys RE6300 extender is just mentioned as an example. You can choose any Linksys extender’s model as per your choice and internet need.

Thank you for reading the article!